www.PowerEsim.com

Welcome to PowerEsim.

If you use Internet Explorer(IE), you need to set the compability view by following steps and try again.


If you still fail to login, there are some potential reasons and suggested actions:

1. This link is clicked from an unauthorized web site. Please contact the website administrator for help.
2. Check your firewall setting to ensure that they will not block the referer information. The following are some notes for firewall setting. If a Corporate Firewall is causing your issue, you will need to contact your company technical support.
3. Use the authorized link from here.
4. If you cannot change these setting, you may use the public version PowerEsim.


Contact PowerELab for any technical assistance. technicalsupport@powerelab.com










Notes for How to Turn Internet Explorer Compatibility View On or Off for a Website


1. In Internet Explorer, click Compatibility View setting on the Tools menu. If you do not see the Tools menu, press ALT.

2. In the Compatibility View Settings windows, type the address of the webpage (e.g www.poweresim.com), and then click Add.


Notes for Firewall Setting

The problem with some firewalls (Norton Internet Security in particular) is that they may default to preventing your Web browser from sending referrer information between pages, and this referer information is required as part of the verification check at this site, used to stop certain internet abuses.

To verify that your firewall is causing the error, temporarily disable your firewall. If you are able to use PowerEsim through this link, re-enable your firewall and follow the instructions below.

Norton Internet Security (NIS) and Norton Personal Firewall (NPF)

By default, Norton Internet Security (NIS) and Norton Personal Firewall (NPF) block this referrer information. Other firewalls may block this information as well. In order to allow referrer information to pass to a particular Website, you must create a rule for it.

  1. Open Norton Internet Security or Norton Personal Firewall.
  2. Do one of the following:
  3. In the bottom of the Advanced window, click Add Site.
  4. In the New Site/Domain box, type the name of the site that you want to receive the referrer information, championship.eastbaymedia.com, and click OK.
    The site name appears in the left frame of the Options window.
  5. Click the name of the new site.
  6. On the Global Settings tab, under the Information about visited sites section, uncheck Use default settings.
  7. Click Permit.
  8. Click OK to close the Options window.

Zone Alarm Pro Version 4.0 & 5.0
Basic Method (fewer steps but a broader modification of the firewall)
  1. Open Zone Alarm Pro
  2. Click Privacy from the options of the left.
  3. Select the Cookie Control tab.
  4. Click Custom.
  5. Make sure the box labeled Block Persistent Cookies is not checked.
  6. Make sure the box labeled Block Third Party Cookies is not checked.
  7. Make sure the box labeled Remove Private Header Information is not checked.

Advanced Method (more steps but a narrower modification of the firewall)

  1. Open Zone Alarm Pro
  2. Click Privacy from the options of the left.
  3. Select the Site List tab
  4. Select Add and enter the following URL -- championship.eastbaymedia.com
  5. Highlight the URL and select Options
  6. Select the Cookies tab
  7. Uncheck the boxes for: Persistent Cookies, 3rd Party Cookies and Remove Private Header Information
  8. Click Apply and then click OK

Zone Alarm Pro Version 3.0
  1. Open Zone Alarm Pro
  2. Select the Privacy Panel
  3. Select the Cookies Tab
  4. Make sure the box labeled Block Persistent Cookies is not checked.
  5. Make sure the box labeled Block Third Party Cookies is not checked.
  6. Make sure the box labeled Remove Private Header Information is not checked.

McAfee Internet Security Version 6 (may work with newer versions)
  1. In the system tray in the lower right corner, find the M icon and right-click it.
  2. Click Privacy Service
  3. Click Open Privacy Service
  4. Look on the right for the heading I want to
  5. Under the heading, click Control Access to Cookies
  6. Cookies from third-party sites will have a default setting of reject. Change it to accept.
  7. Next, click the clean slate tab in the upper right.
  8. At the bottom of the screen, there is an option that says Prevent 'referrer' information from being shared. It is checked by default. Remove the check.
  9. Click Apply then Okay.
  10. Close any remaining McAfee windows.

McAfee Internet Security Version 5

The default settings in McAfee Internet Security block video access. These settings can be modified via the following steps:

  1. Right click the McAfee Guardian icon in the lower right corner of your computer screen.
  2. Select Internet Security.
  3. Select Browser Buddy
  4. Select Settings.
  5. Check the setting labeled either Referer Filter or Search Cleaner
  6. If it is on, it must be turned off.
  7. Check the settings labeled direct cookies and indirect cookies, both must be allowed.

Computer Associates eTrust EZ Firewall or EZ Armor Security Suite
  1. From your Start Menu, choose Programs, and then choose eTrust EZ Firewall or EZ Armor Security Suite to open the program.
  2. On the left side of the window, click Privacy.
  3. Look for the section titled Cookie Control and click the Custom button.
  4. The Custom Privacy Options window will appear -- you will notice that it includes three tabs across the top. Make sure the Cookies tab is on top, and look for the section of the page labeled 3rd Party Cookies.
  5. In that section, uncheck the box labeled Remove private header information.
  6. Click Apply then OK to close the Custom Privacy Options window. Close the program and try accessing the video again.


http://poweresim.com/lease_link.jsp