+  1 Introduction
 +  2 Start a Power Supply Design
 +  3 Component Finder
 +  4 Project Management
 +  5 Loss Analysis
 +  6 Waveform Analysis
 +  7 Monte Carlo Analysis
 +  8 Loop Analysis
 +  9 Thermal Analysis
 +  10 Life & MTBF Analysis
 +  11 BOM - BOM Builder
 +  12 DVT Reports
 +  13 Magnetic Builder
 +  14 Add Parts
 +  15 Report Builder
 +  16 Harmonic
 +  17 EMI Analysis
 +  18 Component Builder
 +  19 Smart Optimizer
 +  20 General Function in PowerEsim
      21 Troubleshooting
 +  22 PowerEsim Account Management
      23 PowerEsim Terms of use
 +  24 User Interface Practice
Better Than Real - Free Switch Mode Power Supply Circuit (SMPS) Design Software & Transformer Calculation / Simulation Tool.
PowerEsim User Manual
PowerEsim is a free web-based software providing power supply (SMPS) design, transformer design, magnetic design, loss analysis, thermal analysis, waveform analysis, MTBF analysis, BOM building, DVT analysis and optimization of power supply (SMPS). Click to try PowerEsim (www.powerEsim.com)




14.3.3 Component List Back to top



14.3.3.1 View / Edit / Delete the added parts Back to top
After adding component to the design, the components will be shown in the Component List. Click on blue button with the designator to view and edit components. Click on [Delete] to remove a component from the design.


14.3.3.2 MTBF Properties Back to top
Click the blue button with the Designator in Component List.

In the bottom side of the new window, there is a region called "MTBF properties".
Click [Component Setting] to enter Component Setting page.

User can modify the MTFB properties in the "MTBF Factor" Area in Component Setting page.



Home | Download | Useful Link | Video Demo | About | Contact Us | Disclaimer | FAQ Statistics | Account Management | Options | Preferences | Help | Table of Content