| + - | 1 | Introduction |
| 1.1 | A New CAD tool on the Internet for Switching Power Supplies |
| 1.2 | Powerful Integrated features |
| 1.3 | A Tool for Engineers |
| 1.4 | A Tool for Managers |
| 1.5 | A Tool for Component Vendors |
| 1.6 | A Tool for Trainees |
| 1.7 | Subscription |
| 1.8 | System Requirement |
| + - | 1.9 | Introduction about User Interface |
| 1.9.1 | Main Menu |
| 1.9.2 | Top Menu |
| 1.9.3 | Design Area |
| 1.9.4 | PowerEsim News |
| 1.9.5 | PowerEsim's Sponsors |
| + - | 2 | Start a Power Supply Design |
| 2.1 | Introduction |
| + - | 2.2 | Start a power supply design |
| 2.2.1 | Start a Design by entering your specification |
| 2.2.2 | Start a Design from Topology |
| 2.2.3 | Start a Design from Reference Design |
| 2.3 | Change the specification of power supply design |
| 2.4 | View / Modify / Change a part from schematic page |
| 2.5 | Choose other topology |
| 2.6 | Change PWM Controller / Filter / Feedback circuit |
| 2.7 | View charts on the front page |
| 2.8 | Print Schematic Diagram |
| + - | 2.9 | Power Supply System (P.S. System) |
| 2.9.1 | Add Power Supply |
| 2.9.2 | Edit Power Supply |
| 2.9.3 | Replace / Remove / Save Power Supply |
| 2.9.4 | Add Input |
| 2.9.5 | Clear Whole Design |
| + - | 3 | Component Finder |
| 3.1 | What is Component Finder? |
| 3.2 | How to start the Component Finder page without topology |
| + - | 3.3 | Introduction about interface (without topology) |
| 3.3.1 | Component Designator |
| + - | 3.3.2 | Change searching criteria |
| 3.3.2.1 | Change the range of searching criteria. |
| 3.3.2.2 | Search component name by phrase |
| 3.3.3 | Select / Change a component from database |
| 3.3.4 | Select multiple components |
| 3.3.5 | Selected Component Box |
| + - | 3.3.6 | Component Analysis Tools |
| 3.3.6.1 | View Component Loss and Stress Summary |
| 3.3.6.2 | View Component Characteristics |
| 3.3.7 | Preview Component shape |
| 3.3.8 | No. of this component in parallel / series |
| 3.3.9 | Component Setting |
| 3.3.10 | Monte Carlo |
| 3.3.11 | Sample Request |
| 3.3.12 | Load Component |
| 3.3.13 | DataSheet |
| 3.3.14 | Switch between MOSFET / IGBT |
| 3.4 | How to start Component Finder page?(with topology) |
| 3.5 | Introduction about interface (with topology) |
| + - | 4 | Project Management |
| 4.1 | What is Project Management ? |
| 4.2 | How to start the Project Management Page |
| 4.3 | Introduction about interface of Project Management Page |
| 4.4 | Add Power Supply to Project |
| 4.5 | Save / Delete / Naming / Change Power Supply from Project |
| + - | 4.6 | Analysis the whole project by PowerEsim's tools |
| 4.6.1 | Loss Analysis under project management status |
| 4.6.2 | DVT Report under project management status |
| 4.6.3 | MTBF Analysis under project management status |
| 4.6.4 | Input Harmonic under project management status |
| 4.6.5 | BOM & Vendor under project management status |
| 4.6.6 | Add Component under project management status |
| 4.7 | Switch between Power Supplies |
| 4.8 | Select Power Supply |
| + - | 5 | Loss Analysis |
| 5.1 | What is Loss analysis? |
| 5.2 | How to start Loss Analysis as a Standalone Tool |
| + - | 5.3 | Introduction to Interface (Standalone Tool) |
| 5.3.1 | Top Bar |
| 5.3.2 | Component List |
| 5.4 | How to start Loss Analysis with Topology |
| + - | 5.5 | Introduction to Interface (With Topology) |
| 5.5.1 | Top Bar |
| 5.5.2 | Graph |
| 5.5.3 | Component List |
| + - | 6 | Waveform Analysis |
| 6.1 | What is waveform analysis? |
| 6.2 | How to start Waveform Analysis as a Standalone Tool |
| 6.3 | Introduction to Interface (Standalone Tool) |
| 6.4 | How to start Waveform Analysis with topology |
| + - | 6.5 | Introduction to Interface (with topology) |
| 6.5.1 | Plots in Waveform Analysis |
| 6.5.2 | Operating Condition Setting |
| + - | 7 | Monte Carlo Analysis |
| 7.1 | What is Monte Carlo Analysis? |
| 7.2 | How to start Monte Carlo as a standalone tool |
| 7.3 | Introduction to Interface (stand alone tool) |
| 7.4 | How to start Monte Carlo (with topology) |
| + - | 7.5 | Introduction to Interface (with topology) |
| 7.5.1 | Top Bar |
| 7.5.2 | No. of Sample |
| 7.5.3 | No. of variating component |
| 7.5.4 | Monte Carlo Analysis Result |
| 7.5.5 | List of enabled Monte Carlo Analysis components |
| 7.5.6 | Component List of all components in design |
| + - | 8 | Loop Analysis |
| + - | 8.1 | Loop Analysis |
| 8.1.1 | What is Loop Analysis? |
| 8.1.2 | How to start Loop Analysis as a Standalone Tool |
| + - | 8.1.3 | Introduction to Interface (Standalone Tool) |
| 8.1.3.1 | Top Bar |
| 8.1.3.2 | Change transfer function coefficients (ai and bi) |
| + - | 8.1.3.3 | Define the range of each coefficient for Automatic Compensation |
| 8.1.3.3.1 | Compensation Setting |
| 8.1.3.4 | Loop Chart |
| 8.1.3.5 | Enter Transient Analysis Page |
| 8.1.4 | How to start Loop Analysis with topology |
| + - | 8.1.5 | Introduction to Interface (With Topology) |
| 8.1.5.1 | Top Bar |
| + - | 8.1.5.2 | Automatic Compensation |
| 8.1.5.2.1 | Compensation Setting |
| 8.1.5.3 | Component List |
| 8.1.5.4 | Loop Chart |
| 8.1.5.5 | Enter Transient Analysis Page |
| + - | 8.2 | Transient Analysis |
| 8.2.1 | What is Transient Analysis? |
| 8.2.2 | How to start Transient Analysis as a Standalone Tool |
| + - | 8.2.3 | Introduction to Interface (Standalone Tool) |
| 8.2.3.1 | Top Bar |
| 8.2.3.2 | Loading Waveform |
| 8.2.3.3 | Transient O/P Waveform |
| 8.2.4 | How to start Transient Analysis With Topology |
| + - | 8.2.5 | Introduction to Interface (With Topology) |
| 8.2.5.1 | Top Bar |
| 8.2.5.2 | Select Output for Analysis |
| 8.2.5.3 | Loading Waveform |
| 8.2.5.4 | Transient O/P Waveform |
| + - | 9 | Thermal Analysis |
| 9.1 | What is thermal analysis? |
| 9.2 | How to start Thermal Analysis as a Standalone Tool |
| + - | 9.3 | Introduction to Interface (Standalone tool) |
| + - | 9.3.1 | Add Part |
| 9.3.1.1 | Add a part for thermal simulation |
| 9.3.1.2 | Add Printed Circuit Board PCB |
| 9.3.2 | Working Area |
| + - | 9.3.3 | Introduction to toolbar functions |
| 9.3.3.1 | Change to Component silk screen |
| 9.3.3.2 | Select multiple components and group them together |
| 9.3.3.3 | Rotate Components |
| 9.3.3.4 | Zoom in or zoom out the working area |
| 9.3.3.5 | Lock a component in position |
| 9.3.3.6 | Put SMT component on the PCB |
| + - | 9.3.3.7 | Start thermal simulation |
| 9.3.3.7.1 | Color map for temperature distribution |
| 9.3.4 | Find a part by designator |
| + - | 9.3.5 | Component Setting and Information |
| 9.3.5.1 | Get and update the physical location of parts after placement |
| 9.3.5.2 | Change Component |
| 9.3.5.3 | Information about selected component |
| 9.3.5.4 | View or edit the component settings |
| 9.3.6 | Scene control |
| + - | 9.3.7 | Top bar |
| 9.3.7.1 | Operating Condition Setting |
| 9.3.7.2 | Save / Load / Export to EXCEL format / Help manual |
| 9.4 | How to start the Thermal Analysis with design |
| + - | 9.5 | Introduction to Interface (with design) |
| + - | 9.5.1 | Top bar |
| 9.5.1.1 | Topology name |
| 9.5.1.2 | Operating Condition Setting |
| 9.5.1.3 | Hidden Part |
| 9.6 | Interface Requirements for viewing Thermal Analysis |
| 9.7 | Create different package style of components |
| 9.8 | Details on helpful shortcut keys |
| 9.9 | Defining Highlighted Losses of added parts |
| + - | 9.10 | Enable Adobe Flash Player in IE, Chrome, Firefox and Opera |
| 9.10.1 | Flash not working in Internet Explorer 11 |
| + - | 10 | Life & MTBF Analysis |
| 10.1 | What is MTBF analysis? |
| 10.2 | How to start Life & MTBF Analysis as a standalone tool |
| + - | 10.3 | Introduction to Interface (standalone tool) |
| 10.3.1 | Top Bar |
| 10.3.2 | Summary of Life & MTBF Analysis result |
| 10.3.3 | Component List |
| 10.3.4 | Export to Excel Format |
| 10.4 | How to start Life & MTBF Analysis (with topology) |
| 10.5 | Introduction to Interface (with topology) |
| + - | 11 | BOM - BOM Builder |
| 11.1 | What is BOM Builder? |
| 11.2 | How to start BOM Builder (without topology) |
| + - | 11.3 | Introduction to Interface (without topology) |
| 11.3.1 | Top Bar |
| + - | 11.3.2 | Modification of the file |
| 11.3.2.1 | View->Edit / Edit->View |
| 11.3.2.2 | Rev ? History |
| 11.3.3 | Component List |
| 11.4 | How to start BOM Builder (with topology) |
| 11.5 | Introduction to Interface (with topology) |
| + - | 12 | DVT Reports |
| 12.1 | What is DVT report? |
| 12.2 | How to start the DVT Report |
| 12.3 | Introduction to Interface (standalone tool) |
| 12.4 | How to start the DVT Report (with topology) |
| + - | 12.5 | Introduction to Interface (with design) |
| 12.5.1 | Top bar |
| 12.5.2 | 4 Corners Test |
| + - | 12.5.3 | Interface of Test Result |
| 12.5.3.1 | Test Name and Testing Condition |
| 12.5.3.2 | Circuit Design Verification |
| + - | 12.5.3.3 | Component Verification |
| + - | 12.5.3.3.1 | Component Setting |
| 12.5.3.3.1.1 | Component Value Setting |
| 12.5.3.3.1.2 | MTBF Factor |
| 12.5.3.3.1.3 | Air Flow |
| + - | 13 | Magnetic Builder |
| 13.1 | What is magnetic builder? |
| 13.2 | How to start Magnetic Builder (without design) |
| + - | 13.3 | Introduction to Interface (standalone tool) |
| 13.3.1 | Select the application of the magnetic component |
| 13.3.2 | Enter the Operating conditions of the application |
| 13.3.3 | General Function |
| + - | 13.3.4 | Recommended Transformer |
| + - | 13.3.4.1 | Advanced Page |
| 13.3.4.1.1 | Top Bar |
| + - | 13.3.4.1.2 | Winding Construction |
| 13.3.4.1.2.1 | Change inductance |
| 13.3.4.1.2.2 | Change core shape |
| + - | 13.3.4.1.2.3 | Winding |
| 13.3.4.1.2.3.1 | Change No. of Turns |
| 13.3.4.1.2.3.2 | Change Wire and No. of Parallel Wire |
| 13.3.4.1.2.3.3 | Change Winding Layer |
| 13.3.4.1.2.3.4 | Rdc+ac |
| + - | 13.3.4.1.2.3.5 | Winding Detail |
| 13.3.4.1.2.3.5.1 | N0 Detail |
| 13.3.4.1.2.3.5.2 | General |
| 13.3.4.1.2.4 | Varnish and UL Insulation System |
| 13.3.4.1.3 | Preview Image for Transformer |
| + - | 13.3.4.1.4 | Transformer Details Setting and General Function |
| 13.3.4.1.4.1 | Bobbin Setting |
| + - | 13.3.4.1.4.2 | Winding Construction |
| 13.3.4.1.4.2.1 | Tape Setting |
| 13.3.4.1.4.2.2 | Winding Construction |
| 13.3.4.1.4.3 | Winding Wizard Setting |
| 13.3.4.1.4.4 | Short Cut function |
| + - | 13.3.4.1.4.5 | General Function |
| 13.3.4.1.4.5.1 | Save Transformer |
| 13.3.4.1.4.5.2 | Load Transformer |
| 13.3.4.1.4.5.3 | Add Transformer to design |
| 13.3.4.1.4.5.4 | Generate Drawing |
| 13.3.4.1.4.5.5 | Transformer Tester |
| 13.3.4.1.4.5.6 | Transformer's Loss and Stress Summary |
| 13.3.4.1.4.5.7 | Sample Request |
| + - | 14 | Add Parts |
| 14.1 | What is Add Parts? |
| 14.2 | How to start Add Parts(without topology)? |
| + - | 14.3 | Introduction about interface(stand alone tool) |
| 14.3.1 | Top bar |
| + - | 14.3.2 | Create new components |
| 14.3.2.1 | Component Finder page |
| + - | 14.3.2.2 | General Component page |
| 14.3.2.2.1 | Customize a Heat Sink |
| 14.3.2.2.2 | Customize a PCB |
| 14.3.2.2.3 | Customize a Electrical Barrier |
| 14.3.2.2.4 | Customize other type of component |
| 14.3.2.2.5 | MTBF Properties |
| + - | 14.3.3 | Component List |
| 14.3.3.1 | View / Edit / Delete the added parts |
| 14.3.3.2 | MTBF Properties |
| 14.4 | How to start Add Parts(with topology)? |
| 14.5 | Introduction about interface (with topology) |
| + - | 15 | Report Builder |
| 15.1 | What is Report Builder? |
| 15.2 | How to start Report Builder(Standalone tool)? |
| 15.3 | Introduction about interface(Standalone tool) |
| 15.4 | How to start Report Builder(with topology)? |
| 15.5 | Introduction about interface (with topology) |
| + - | 16 | Harmonic |
| 16.1 | What is Input Harmonic Analysis? |
| 16.2 | How to start Input Harmonic Analysis?(Standalone Tool) |
| + - | 16.3 | Introduction about interface(Standalone Tool) |
| 16.3.1 | Top Bar |
| 16.3.2 | Input Harmonic Analysis Setting |
| 16.3.3 | Input Waveform |
| 16.3.4 | Simulated Harmonic |
| 16.4 | How to start Input Harmonic Analysis?(With Topology) |
| 16.5 | Introduction about interface(With Topology) |
| + - | 17 | EMI Analysis |
| 17.1 |
| + - | 18 | Component Builder |
| 18.1 | What is Component Builder ? |
| 18.2 | How to start Component Builder? (Standalone Tool) |
| 18.3 | Introduction about interface(Standalone Tool) |
| + - | 19 | Smart Optimizer |
| 19.1 | What is the Smart Optimizer? |
| 19.2 | How to start Smart Optimizer? (With Topology) |
| 19.3 | Introduction About Interface (With Topology) |
| + - | 20 | General Function in PowerEsim |
| 20.1 | Save and Load Design |
| 20.2 | Export the result in EXCEL format |
| 20.3 | Export the report in PDF format |
| 20.4 | User manual |
| 20.5 | Sample Request |
| 20.6 | Preference |
| 20.7 | Option |
| + - | 20.8 | PowerEsim Account |
| 20.8.1 | Login Private Account |
| + - | 20.8.2 | Sponsor Account |
| 20.8.2.1 | What is sponsor account? |
| 20.8.2.2 | How to login sponsor account? |
| + - | 20.8.2.3 | Index |
| 20.8.2.3.1 | Use Free Advanced Features Sponsor's Accounts |
| 20.8.2.3.2 | Apply your own Free Full Version Private Account |
| 20.8.2.3.3 | Let your components available at PowerEsim |
| 20.8.2.3.4 | Full Version Corporate Account |
| 20.8.2.3.5 | Features Tables For Different Accounts |
| 20.8.2.3.6 | Invite Friend To Join 14 Days PowerEsim Private Account |
| 21 | Troubleshooting |
| + - | 22 | PowerEsim Account Management |
| 22.1 | Add user account (for Administrator only) |
| 22.2 | Manage user account (for Administrator only) |
| 22.3 | Logout user(s) (for Administrator only) |
| 23 | PowerEsim Terms of use |
| + - | 24 | User Interface Practice |
| 24.1 | Button Color and Practice |
 | Better Than Real - Free Switch Mode Power Supply Circuit (SMPS) Design Software & Transformer Calculation / Simulation Tool. |
| PowerEsim User Manual |
Add a component with the Add part tool (Please refer to Session 14--Add Parts).
In the component list of BOM or Add part, click the blue button with the Designator to enter Component Finder page.
In the component list of BOM or Add part, click the blue button with the Designator to enter Component Finder page.
|
Home | Download | Useful Link | Video Demo | About | Contact Us | Disclaimer | FAQ Statistics | Account Management | Options | Preferences | Help | Table of Content |
|
Loss
| Thermal
| DVT Report
| Life & MTBF
| Loop & Stability
| Harmonic
| Monte Carlo
| Waveform
Magnetic Builder | BOM & Vendors | Comp. Builder | Report Builder | Add Part | Smart Optimizer |